Explore our high-performance industrial telemetry systems deployed globally in mission-critical infrastructures.
DC12~48V + POE power supply. Monitors Temperature, Humidity, and Dew Point over standard Ethernet networking.
View Detail
Features separated sensor probe via a 1-3 meter cable, ideal for hard-to-reach industrial ducting or tight spaces.
View Detail
Adds pressure differential monitoring alongside Temperature, Humidity, and Dew Point parameters for advanced cleanrooms.
View Detail
Offers dual-mode network capability. Primary wired Ethernet combined with backup wireless WiFi connectivity.
View Detail
Integrates temperature, humidity, carbon monoxide (CO), and Indoor Air Quality (IAQ) telemetry for occupational safety.
View Detail
Long-range, low-power wireless environmental monitoring solution optimized for large industrial workshops and warehouses.
View Detail
Integrates sulfur dioxide, nitrogen dioxide, temperature, humidity, and dew point measurements with high-precision sensitivity.
View Detail
Monitors critical oxygen levels and highly toxic hydrogen sulfide gas. Features 1-channel relay output for active safety ventilation control.
View DetailUnderstanding the architecture, interface protocols, and physical layer standards governing modern Ethernet environmental sensing.
In modern industrial automation, the traditional analog methods of monitoring environmental parameters (such as 4-20mA or 0-10V loops) are rapidly giving way to digital Ethernet-based infrastructures. An RJ45 Temperature and Humidity Sensor interfaces directly with existing Local Area Networks (LANs), utilizing the TCP/IP stack to communicate highly accurate, digitized telemetry. This eliminates signal degradation associated with long run cables, electromagnetic interference, and digital-to-analog conversion errors.
By leveraging Power over Ethernet (PoE) standards such as IEEE 802.3af, these devices combine data transmission and electrical power supply into a single Cat5e or Cat6 network cable. This simplifies wiring architecture, drastically lowers installation labor costs, and enables simple integration with centralized Uninterruptible Power Supply (UPS) systems in critical installations like colocation data centers and sterile cleanrooms.
Supports multiple industrial protocols natively, permitting direct communication with PLC systems, SCADA platforms, and Network Management Systems (NMS) without intermediary gateways.
Equipped with imported Swiss Sensirion capacitive sensor chips, guaranteeing drift-free accuracy of up to ±0.2°C temperature and ±2% RH humidity over prolonged industrial operations.
Features internal physical layer isolation to defend the microprocessor and sensitive analog components from power surges, ground loops, and transient electrical noise.
A Professional Manufacturer of Precision Environmental Telemetry Sensors Since 2007
Founded in 2007, Beijing Yingchuanglihe Electronic Technology Co., Ltd. has established itself as an authoritative leader in the development and manufacturing of industrial-grade environmental monitoring equipment. With a modern manufacturing complex spanning over 1,500 square meters and a dedicated staff of over 100 electronic hardware engineers, firmware designers, and precision calibrators, our Beijing-based facility delivers end-to-end OEM/ODM design-to-build workflows. Our solutions provide accurate, reliable, and real-time environmental telemetry across global smart industries.
A history of technological leaps in Ethernet sensing, strategic industry partnerships, and large-scale deployments.
Established in Beijing, introducing our first smart environmental monitoring terminal utilizing TCP/IP communications and custom host monitoring software.
Collaborated with network management giant Mocha Software to launch the TH-5939 series supporting native SNMP integration.
Partnered with Swiss COMLAB to supply the TH-5869 protective Ethernet sensors for the Beijing-Kowloon, Beijing-Shanghai, and Wuhan-Guangzhou high-speed rail lines.
Launched the APEM-6100 with Founder Technology, representing one of the earliest environmental monitoring designs implementing Power over Ethernet (PoE).
Forged manufacturing ties with Foxconn Taiwan, establishing our industrial sensors as standard environmental hardware for production cleanrooms.
Partnered with Baidu to deploy the next-gen APEM-5900 Ethernet smart sensors inside the massive Baidu Yangquan Data Center cluster.
Developed integrated cabinet monitoring structures widely adopted in Huawei and China Merchants Huaruan highway ETC infrastructure projects.
Supplied high-reliability edge computing gateways and sensors for Beijing's high-level autonomous driving public road test road boxes.
Co-founded a Beidou business division with BUCEA and established joint ventures with Beijing Enterprises Water Group for smart pipeline telemetry.
How RJ45-enabled Ethernet telemetry sensors perform across diverse environments.
In data center environments, temperature spikes or sudden condensation can cause outages. Beijing Yingchuanglihe's RJ45 sensors enable network administrators to receive early warning alerts via email, SNMP Traps, or local alarms. In biotechnology and pharmaceutical manufacturing, our sensors comply with international standards to ensure cleanroom environmental compliance.
For smart agriculture and cold-chain logistics storage, these sensors monitor microclimates to ensure organic preservation. Our IP65-rated probe options withstand condensation, allowing sensors to be placed inside high-humidity chambers while the RJ45 data unit remains safely isolated outside.
Leveraging Beijing's advanced technical ecosystem to deliver high quality and reliability.
Operating a sensor factory in China is more than just assembly; it requires leveraging a robust hardware supply chain ecosystem. At our Beijing assembly lines, we integrate Swiss Sensirion micro-sensors and German raw materials with domestic manufacturing protocols. By controlling the complete design process, our R&D team can customize firmware, adjust PCB designs, and adapt communication protocols to meet client specifications in weeks rather than months.
Our facility runs five automated production lines equipped with high-throughput SMT machines, automatic soldering equipment, and calibrated climate chambers. Every single sensor unit undergoes a multi-point calibration run against international references to verify operational precision. This calibration loop ensures that when an OEM customer orders 5,000 units, the first sensor performs identically to the last, keeping drift within strict tolerances.
Advancing environmental telemetry through Edge Computing, AI diagnostics, and Beidou satellite connectivity.
The future of environmental sensing lies in smart telemetry. At Beijing Yingchuanglihe, our engineering teams are actively designing the next generation of RJ45 sensors featuring local edge analytics. Future iterations of the APEM series will process environmental data at the hardware level, executing predictive anomaly detection directly on-chip rather than relying entirely on central servers. This reduces bandwidth requirements and keeps critical systems operational during network drops.
Furthermore, our joint venture focusing on Beidou satellite technology will introduce high-precision geocentric positioning coordinate capabilities directly into our outdoor environmental cabinet sensors. This integration will provide automated warnings for slope stability, pipeline stress, and deformation alongside traditional humidity and temperature alerts, creating a multi-layered telemetry network.
Strict QA testing and regulatory compliance ensure trouble-free global system integration.
As a global OEM/ODM manufacturer, Beijing Yingchuanglihe ensures all environmental hardware meets international standards. Our sensors have undergone certification checks to secure CE, FCC, and RoHS stamps. We use flame-retardant materials, lead-free components, and robust electromagnetic shielding to prevent noise emission in crowded industrial setups.
Our team showcasing environmental engineering innovations at major global technology events.
Get answers to common technical queries about RJ45 environmental sensors, PoE wiring, and OEM configurations.
Select the ideal telemetry module for your system architecture, backed by our 18-year industrial manufacturing warranty.
Monitors chemical pollutants and ozone degradation risks alongside temperature, humidity, and dew point parameters.
View Detail
High-performance sensor logger designed for smart building ventilation systems, certified to CE specifications.
View Detail
Measures TVOC, formaldehyde, temperature, and humidity, with data logging features and PoE network capabilities.
View Detail
Wired Ethernet temperature and humidity transmitter with customizable probe cables (1m to 3m options).
View Detail
Designed for data centers and smart offices, providing direct temperature, humidity, and dew point measurements.
View Detail
Custom environmental monitoring sensor integrating CO and air quality measurements for warehouse ventilation.
View Detail
Wireless industrial environmental monitoring system designed for wide-area manufacturing workshops and campuses.
View Detail
Complies with CE standards to monitor sulfur dioxide and nitrogen dioxide levels in heavy industrial environments.
View Detail
YCLH Sensor